Members Can Post Anonymously On This Site
-
Similar Topics
-
By NASA
Explore This Section Science Science Activation Tribal Library Co-Design STEM… Overview Learning Resources Science Activation Teams SME Map Opportunities More Science Activation Stories Citizen Science 3 min read
Tribal Library Co-Design STEM Space Workshop
Christine Shupla and Claire Ratcliffe Adams, from the NASA Science Activation program’s NASA@ My Library project, facilitated a professional development Co-Design Space Science, Technology, Engineering, & Mathematics (STEM) Workshop for Tribal libraries on August 29, 2024, hosted at the New Mexico State Library. The workshop was planned with input from Cassandra Osterloh (the New Mexico State Library’s Tribal Libraries Program Coordinator), Teresa Naranjo and Charles Suazo (of the Santa Clara Pueblo Library) and Rexine Calvert (of the P’oe Tsawa Community Library). Evaluation surveys indicate that the workshop met or exceeded 100% of participants’ expectations, and that activities could be made culturally relevant by the participants. Based on input from tribal advisors, the focus topic was space science (although there was also significant interest in various Earth science and environmental topics and in engineering design). These advisors also suggested that the workshop focus on co-design to enable the workshop participants to share and consider ways to make the content and activities culturally-relevant.
The team selected space STEM activities that could be done within library programs and that were within different categories:
Passive programming activities (which were available while participants were arriving) Physically active activities Engineering design activities Art/Science, Technology, Engineering, Art, & Mathematics (STEAM) activities After each type of activity, participants discussed aspects of the activities that they liked, modifications to make the activity more culturally-relevant for their Tribal community, and other activities within that category.
Throughout the workshop, Christine and Claire reiterated that the participants’ thoughts and input were critical—that they were the keepers of knowledge of their communities and that their voices were respected.
One participant stated, “I like how the instructors were re-assuring throughout the session. Making sure everyone was comfortable and making it feel safe to share ideas.” Another, said, “I tend to not participate, but observe, because I’m not a scientist. It was awesome (feeling comfortable) to design too!”
Sixteen of the participants filled out and returned evaluation surveys handed out at the close of the workshop. Just over 50% of those survey responses indicated that the workshop exceeded expectations; all others indicated that it met expectations. Participants also indicated that the activities themselves enabled participants to co-design and make them culturally relevant; this likely is in reference to the discussions held after each activity about ways to apply and revise them. The discussion after a crater-creation activity was particularly extensive: participants discussed replacing the materials with local materials and incorporating aspects of the local topography and even local art. Several participants expressed the desire for more workshops.
The NASA@ My Library project is supported by NASA under cooperative agreement award number NNX16AE30A and is part of NASA’s Science Activation Portfolio. Learn more about how Science Activation connects NASA science experts, real content, and experiences with community leaders to do science in ways that activate minds and promote deeper understanding of our world and beyond: https://science.nasa.gov/learn
Workshop participants conducting the “Touchdown” activity, simulating insertion of a rover into an unknown environment. Christine Shupla Share
Details
Last Updated Feb 13, 2025 Editor Earth Science Division Editorial Team Related Terms
Science Activation Earth Science Heliophysics Planetary Science Explore More
2 min read Newly Minted Ph.D. Studies Phytoplankton with NASA’s FjordPhyto Project
Article
3 days ago
5 min read NASA CubeSat Finds New Radiation Belts After May 2024 Solar Storm
Article
1 week ago
3 min read NASA’s Cloud-based Confluence Software Helps Hydrologists Study Rivers on a Global Scale
Article
1 week ago
Keep Exploring Discover More Topics From NASA
James Webb Space Telescope
Webb is the premier observatory of the next decade, serving thousands of astronomers worldwide. It studies every phase in the…
Perseverance Rover
This rover and its aerial sidekick were assigned to study the geology of Mars and seek signs of ancient microbial…
Parker Solar Probe
On a mission to “touch the Sun,” NASA’s Parker Solar Probe became the first spacecraft to fly through the corona…
Juno
NASA’s Juno spacecraft entered orbit around Jupiter in 2016, the first explorer to peer below the planet’s dense clouds to…
View the full article
-
By NASA
5 min read
Preparations for Next Moonwalk Simulations Underway (and Underwater)
NASA’s SPHEREx mission will survey the Milky Way galaxy looking for water ice and other key ingredients for life. In the search for these frozen compounds, the mission will focus on molecular clouds — collections of gas and dust in space — like this one imaged by the agency’s James Webb Space Telescope. NASA, ESA, CSA Where is all the water that may form oceans on distant planets and moons? The SPHEREx astrophysics mission will search the galaxy and take stock.
Every living organism on Earth needs water to survive, so scientists searching for life outside our solar system, are often guided by the phrase “follow the water.” Scheduled to launch no earlier than Thursday, Feb. 27, NASA’s SPHEREx (Spectro-Photometer for the History of the Universe, Epoch of Reionization, and Ices Explorer) mission will help in that quest.
After its ride aboard a SpaceX Falcon 9 from Vandenberg Space Force base in California, the observatory will search for water, carbon dioxide, carbon monoxide, and other key ingredients for life frozen on the surface of interstellar dust grains in the clouds of gas and dust where planets and stars eventually form.
While there are no oceans or lakes floating freely in space, scientists think these reservoirs of ice, bound to small dust grains, are where most of the water in our universe forms and resides. Additionally, the water in Earth’s oceans as well as those of other planets and moons in our galaxy likely originated in such locations.
The Perseus Molecular Cloud, located about 1,000 light-years from Earth, was imaged by NASA’s retired Spitzer Space Telescope. NASA’s SPHEREx mission will search the galaxy for water ice and other frozen compounds in clouds of gas and dust in space like this one. NASA/JPL-Caltech The mission will focus on massive regions of gas and dust called molecular clouds. Within those, SPHEREx will also look at some newly formed stars and the disks of material around them from which new planets are born.
Although space telescopes such as NASA’s James Webb and retired Spitzer have detected water, carbon dioxide, carbon monoxide, and other compounds in hundreds of targets, the SPHEREx observatory is the first to be uniquely equipped to conduct a large-scale survey of the galaxy in search of water ice and other frozen compounds.
Get the SPHEREx Press Kit Rather than taking 2D images of a target like a star, SPHEREx will gather 3D data along its line of sight. That enables scientists to see the amount of ice present in a molecular cloud and observe how the composition of the ices throughout the cloud changes in different environments.
By making more than 9 million of these line-of-sight observations and creating the largest-ever survey of these materials, the mission will help scientists better understand how these compounds form on dust grains and how different environments can influence their abundance.
Tip of the Iceberg
It makes sense that the composition of planets and stars would reflect the molecular clouds they formed in. However, researchers are still working to confirm the specifics of the planet formation process, and the universe doesn’t always match scientists’ expectations.
For example, a NASA mission launched in 1998, the Submillimeter Wave Astronomy Satellite (SWAS), surveyed the galaxy for water in gas form — including in molecular clouds — but found far less than expected.
BAE Systems employees work on NASA’s SPHEREx observatory in the Astrotech Space Operations facility at Vandenberg Space Force Base in California on Jan. 16. Targeting a Feb. 27 launch, the mission will map the entire sky in infrared light. NASA/JPL-Caltech “This puzzled us for a while,” said Gary Melnick, a senior astronomer at the Center for Astrophysics | Harvard & Smithsonian and a member of the SPHEREx science team. “We eventually realized that SWAS had detected gaseous water in thin layers near the surface of molecular clouds, suggesting that there might be a lot more water inside the clouds, locked up as ice.”
The mission team’s hypothesis also made sense because SWAS detected less oxygen gas (two oxygen atoms bound together) than expected. They concluded that the oxygen atoms were sticking to interstellar dust grains, and were then joined by hydrogen atoms, forming water. Later research confirmed this. What’s more, the clouds shield molecules from cosmic radiation that would otherwise break those compounds apart. As a result, water ice and other materials stored deep in a cloud’s interior are protected.
As starlight passes through a molecular cloud, molecules like water and carbon dioxide block certain wavelengths of light, creating a distinct signature that SPHEREx and other missions like Webb can identify using a technique called absorption spectroscopy.
In addition to providing a more detailed accounting of the abundance of these frozen compounds, SPHEREx will help researchers answer questions including how deep into molecular clouds ice begins to form, how the abundance of water and other ices changes with the density of a molecular cloud, and how that abundance changes once a star forms.
Powerful Partnerships
As a survey telescope, SPHEREx is designed to study large portions of the sky relatively quickly, and its results can be used in conjunction with data from targeted telescopes like Webb, which observe a significantly smaller area but can see their targets in greater detail.
“If SPHEREx discovers a particularly intriguing location, Webb can study that target with higher spectral resolving power and in wavelengths that SPHEREx cannot detect,” said Melnick. “These two telescopes could form a highly effective partnership.”
More About SPHEREx
SPHEREx is managed by NASA’s Jet Propulsion Laboratory in Southern California for the Astrophysics Division within the Science Mission Directorate at NASA Headquarters in Washington. BAE Systems (formerly Ball Aerospace) built the telescope and the spacecraft bus. The science analysis of the SPHEREx data will be conducted by a team of scientists located at 10 institutions in the U.S., two in South Korea, and one in Taiwan. Data will be processed and archived at IPAC at Caltech, which manages JPL for NASA. The mission principal investigator is based at Caltech with a joint JPL appointment. The SPHEREx dataset will be publicly available at the NASA/IPAC Infrared Science Archive.
For more information about the SPHEREx mission visit:
https://www.jpl.nasa.gov/missions/spherex/
6 Things to Know About SPHEREx Why NASA’s SPHEREx Mission Will Make ‘Most Colorful’ Cosmic Map Ever News Media Contact
Calla Cofield
Jet Propulsion Laboratory, Pasadena, Calif.
626-808-2469
calla.e.cofield@jpl.nasa.gov
2025-020
Share
Details
Last Updated Feb 13, 2025 Related Terms
SPHEREx (Spectro-Photometer for the History of the Universe and Ices Explorer) Astrophysics Exoplanets Galaxies Jet Propulsion Laboratory Stars The Universe Explore More
5 min read Webb Maps Full Picture of How Phoenix Galaxy Cluster Forms Stars
Discovery proves decades-old theory of galaxy feeding cycle. Researchers using NASA’s James Webb Space Telescope…
Article 2 hours ago 4 min read NASA Successfully Joins Sunshade to Roman Observatory’s ‘Exoskeleton’
Article 1 day ago 4 min read NASA’s Mini Rover Team Is Packed for Lunar Journey
Article 2 days ago Keep Exploring Discover Related Topics
Missions
Humans in Space
Climate Change
Solar System
View the full article
-
By NASA
2 min read
Preparations for Next Moonwalk Simulations Underway (and Underwater)
Technicians at Thales Alenia Space in Turin, Italy, lower Gateway’s HALO (Habitation and Logistics Outpost) onto a stand in the cleanroom.Thales Alenia Space When NASA’s Artemis IV astronauts journey to the Moon, they will make the inaugural visit to Gateway, humanity’s first space station in lunar orbit. Shown here, technicians carefully guide HALO (Habitation and Logistics Outpost)—a foundational element of Gateway—onto a stand in the cleanroom at Thales Alenia Space in Turin, Italy. The element’s intricate structure, designed to support astronauts and science in lunar orbit, has entered the cleanroom after successfully completing a series of rigorous environmental stress tests.
In the cleanroom, technicians will make final installations before preparing the module for transport to the United States, a key milestone on its path to launch. This process includes installing and testing valves and hatches, performing leak checks, and integrating external secondary structures. Once these steps are finished, the module will be packaged for shipment to Gilbert, Arizona, where Northrop Grumman will complete its outfitting.
Technicians at Thales Alenia Space in Turin, Italy, oversee the HALO module’s transfer to the cleanroom.Thales Alenia Space As one of Gateway’s four pressurized modules, HALO will provide Artemis astronauts with space to live, work, conduct scientific research, and prepare for missions to the lunar surface. The module will also support internal and external science payloads, including a space weather instrument suite attached via a Canadian Space Agency Small Orbital Replacement Unit Robotic Interface, host the Lunar Link communications system developed by European Space Agency, and offer docking ports for visiting vehicles, including lunar landers and NASA’s Orion spacecraft.
Developed in collaboration with industry and international partners, Gateway is a cornerstone of NASA’s Artemis campaign to advance science and exploration on and around the Moon in preparation for the next giant leap: the first human missions to Mars.
Learn More About Gateway Facebook logo @NASAGateway @NASA_Gateway Instagram logo @nasaartemis Share
Details
Last Updated Feb 13, 2025 ContactLaura RochonLocationJohnson Space Center Related Terms
Artemis Artemis 4 Earth's Moon Exploration Systems Development Mission Directorate Gateway Program Gateway Space Station Humans in Space Johnson Space Center Explore More
2 min read Advanced Modeling Enhances Gateway’s Lunar Dust Defense
Ahead of more frequent and intense contact with dust during Artemis missions, NASA is developing…
Article 3 weeks ago 2 min read Gateway Tops Off
Gateway’s Power and Propulsion Element is now equipped with its xenon and liquid fuel tanks.
Article 3 months ago 2 min read Gateway: Life in a Lunar Module
Article 4 months ago Keep Exploring Discover More Topics From NASA
Humans In Space
Orion Spacecraft
Human Landing System
Extravehicular Activity and Human Surface Mobility
View the full article
-
By NASA
The cover of Spinoff 2025, NASA’s annual publication that chronicles commercial products born from space technology, is a detailed view of the lunar surface captured by cameras on the Orion spacecraft on a close approach of the Moon during the Artemis I mission.Credit: NASA The latest edition of NASA’s Spinoff publication, which highlights the successful transfer of agency technology to the commercial sector, is now available online.
For nearly 25 years, NASA has supported crew working in low Earth orbit to learn about the space environment and perform research to advance deep space exploration. Astronauts aboard the International Space Station have learned a wealth of lessons and tried out a host of new technologies. This work leads to ongoing innovations benefiting people on Earth that are featured in NASA’s annual publication.
“The work we do in space has resulted in navigational technologies, lifesaving medical advancements, and enhanced software systems that continue to benefit our lives on Earth,” said Clayton Turner, associate administrator, Space Technology Mission Directorate at NASA Headquarters in Washington. “Technologies developed today don’t just make life on our home planet easier – they pave the way to a sustained presence on the Moon and future missions to Mars.”
The Spinoff 2025 publication features more than 40 commercial infusions of NASA technologies including:
A platform enabling commercial industry to perform science on the space station, including the growth of higher-quality human heart tissue, knee cartilage, and pharmaceutical crystals that can be grown on Earth to develop new medical treatments. An electrostatic sprayer technology to water plants without the help of gravity and now used in sanitation, agriculture, and food safety. “Antigravity” treadmills helping people with a variety of conditions run or walk for exercise, stemming from efforts to improve astronauts’ fitness in the weightlessness of space. Nutritional supplements originally intended to keep astronauts fit and mitigate the health hazards of a long stay in space. As NASA continues advancing technology and research in low Earth orbit to establish a sustained presence at the Moon, upcoming lunar missions are already spinning off technologies on Earth. For example, Spinoff 2025 features a company that invented technology for 3D printing buildings on the Moon that is now using it to print large structures on Earth. Another group of researchers studying how to grow lunar buildings from fungus is now selling specially grown mushrooms and plans to build homes on Earth using the same concept.
Spinoffs produce innovative technologies with commercial applications for the benefit of all. Other highlights of Spinoff 2025 include quality control on assembly lines inspired by artificial intelligence developed to help rovers navigate Mars, innovations in origami based on math for lasers and optical computing, and companies that will help lead the way to hydrogen-based energy building on NASA’s foundation of using liquid hydrogen for rocket fuel.
“I’ve learned it’s almost impossible to predict where space technology will find an application in the commercial market,” said Dan Lockney, Technology Transfer program executive at NASA Headquarters in Washington. “One thing I can say for sure, though, is NASA’s technology will continue to spin off, because it’s our goal to advance our missions and bolster the American economy.”
This publication also features 20 technologies available for licensing with the potential for commercialization. Check out the “Spinoffs of Tomorrow” section to learn more.
Spinoff is part of NASA’s Space Technology Mission Directorate and its Technology Transfer program. Tech Transfer is charged with finding broad, innovative applications for NASA-developed technology through partnerships and licensing agreements, ensuring agency investments benefit the nation and the world.
To read the latest issue of Spinoff, visit:
https://spinoff.nasa.gov
-end-
Jasmine Hopkins
Headquarters, Washington
321-431-4624
jasmine.s.hopkins@nasa.gov
Share
Details
Last Updated Feb 12, 2025 LocationNASA Headquarters Related Terms
NASA Centers & Facilities Ames Research Center Armstrong Flight Research Center Glenn Research Center Goddard Institute for Space Studies Goddard Space Flight Center Jet Propulsion Laboratory Johnson Space Center Kennedy Space Center Langley Research Center Marshall Space Flight Center NASA Headquarters Space Technology Mission Directorate Spinoffs Stennis Space Center Technology Transfer Technology Transfer & Spinoffs View the full article
-
By NASA
On Feb. 8, 2010, space shuttle Endeavour began its 24th trip into space, on the 20A assembly mission to the International Space Station, the 32nd shuttle flight to the orbiting lab. The STS-130 crew included Commander George Zamka, Pilot Terry Virts, and Mission Specialists Kathryn Hire, Stephen Robinson, Nicholas Patrick, and Robert Behnken. During the nearly 14-day mission, they worked jointly with the five-person Expedition 22 crew during nearly 10 days of docked operations. The mission’s primary objectives included delivering the Tranquility module and the cupola to the space station, adding 21 tons of hardware to the facility. Behnken and Patrick conducted three spacewalks to aid in the installation of Tranquility.
The STS-130 crew patch. Official photograph of the STS-130 crew of Nicholas Patrick, left, Terry Virts, Robert Behnken, Kathryn Hire, George Zamka, and Stephen Robinson. The International Space Station 20A assembly mission payload patch. In the Vertical Assembly Building at NASA’s Kennedy Space Center in Florida, workers prepare to lift Endeavour to mate it with its external tank and solid rocket boosters. Space shuttle Endeavour rolls out of the assembly building for its journey to Launch Pad 39A. The STS-130 astronauts leave crew quarters for the ride to Launch Pad 39A. Liftoff of space shuttle Endeavour on STS-130. Endeavour rolled out to Launch Pad 39A on Jan. 6, 2010, targeting a Feb. 7 launch. The crew arrived at NASA’s Kennedy Space Center in Florida on Feb. 3 to prepare for launch. Inclement weather delayed the initial launch attempt by 24 hours. On Feb. 8, at 4:14 a.m. EST, space shuttle Endeavour lifted off, carrying its six-person crew. The flight marked Robinson’s fourth trip into space, previously serving as a mission specialist on STS-85, STS-95, and STS-114, Zamka’s, Hire’s, Patrick’s, and Behnken’s second time in space, having flown on STS-120, STS-90, STS-116, and STS-123, respectively, while Virts enjoyed his first taste of weightlessness.
STS-130 Commander George Zamka, left, Mission Specialist Stephen Robinson, and Pilot Terry Virts on Endeavour’s flight deck on the mission’s first day in space. The shuttle robotic arm grasps the Orbiter Boom Sensor System for the wing leading edge inspection. Endeavour as seen from the space station during the rendezvous. View of the space station from Endeavour during the rendezvous. After reaching orbit, the astronauts opened the payload bay doors, deployed the shuttle’s radiators, and removed their bulky launch and entry suits, stowing them for the remainder of the flight. They spent six hours on their second day in space conducting a detailed inspection of Endeavour’s nose cap and wing leading edges, taking turns operating the shuttle remote manipulator system, or robotic arm, and the Orbiter Boom Sensor System.
On the mission’s third day, Zamka assisted by his crewmates brought Endeavour in for a docking with the space station. During the rendezvous, Zamka stopped the approach at 600 feet and completed a pitch maneuver so astronauts aboard the station could photograph Endeavour’s underside to look for any damage to the tiles. Zamka then manually guided Endeavour to a docking at the Pressurized Mating Adapter-2 attached to the Harmony module. After docking, the crews opened the hatches and the five-person station crew welcomed the six-member shuttle crew. Patrick and Expedition 22 Flight Engineer Timothy “T.J.” Creamer used the space station robotic arm to remove the inspection boom and hand it off to the shuttle arm operated by Hire and Virts. At the end of the day, Behnken and Partick entered the station’s airlock, reduced its pressure and breathed pure oxygen for an hour before and an hour after sleep to rid their bodies of nitrogen to prevent the bends.
Transfer of the Tranquility and cupola modules from the space shuttle to the space station. Robert Behnken, left, and Nicholas Patrick during the mission’s first spacewalk. STS-130 astronauts Stephen Robinson, top left, and Terry Virts and Expedition 22 Flight Engineer Soichi Noguchi of JAXA (Japan Aerospace Exploration Agency) in the newly installed Tranquility module. Nicholas Patrick, left, and Robert Behnken during the mission’s second spacewalk. The astronauts completed the major transfer activity of the mission on flight day five, a highly choreographed spacewalk and robotics effort to move the Tranquility and cupola modules from the shuttle to the station. Behnken and Patrick exited the airlock to begin the mission’s first excursion, first venturing to the shuttle payload bay to remove launch locks from Tranquility. Virts and Hire used the station arm to remove the joined modules from the payload bay and attach it to the Unity module’s port side. Behnken and Partick connected temporary heater and data cables to the new module. This first spacewalk lasted six hours 32 minutes. The next day, the joint crews began outfitting Tranquility and preparing to relocate the cupola from the end of the module to its Earth-facing port.
On the mission’s seventh day, some of the astronauts continued outfitting and configuring the new modules. In the meantime, Behnken and Patrick stepped outside for a five-hour 54-minute excursion, to install ammonia coolant loops and thermal blankets to protect the ammonia hoses, and outfitted Tranquility’s Earth-facing port to accept the cupola.
Relocation of the cupola to Tranquility’s Earth-facing port. Kathryn Hire, left, Terry Virts, and Expedition 22 Commander Jeffery Williams operate the space station’s robotic arm to relocate the cupola. During the mission’s third spacewalk, Nicholas Patrick, left, and Robert Behnken remove thermal blankets from the cupola. Terry Virts, left, and Jeffery Williams in the cupola after opening the windows for the first time. The next day, Hire and Virts, assisted by Expedition 22 Commander Jeffery Williams, used the station’s robotic arm to relocate the cupola. On flight day 9, Behnken and Patrick operated the station arm to relocate the Pressurized Mating Adapter-3 from Harmony to Tranquility. The crews continued internal cargo transfers and began outfitting the cupola.
On the mission’s 10th day, Patrick and Behnken completed their third and final spacewalk. During the five-hour 48-minute excursion, they removed thermal blankets and launch locks from the cupola, installed handrails, connected the second cooling loop on Tranquility, and connected heater and data cables. Inside the cupola, Hire and Virts installed the robotics workstation. Across their three spacewalks, Behnken and Patrick spent 18 hours 14 minutes outside.
Stephen Robinson, left, Soichi Noguchi of JAXA (Japan Aerospace Exploration Agency), and Nicholas Patrick transfer an environmental control system rack into Tranquility. George Zamka cuts the ribbon to officially open Tranquility for business, as Jeffery Williams looks on. The 11 members of STS-130 and Expedition 22 pose for a final photograph before saying farewell. The STS-130 crew poses in the cupola. Fisheye lens view of the two crews enjoying a meal together. The crews spent flight day 11 outfitting Tranquility with systems racks and other equipment moved from the Destiny U.S. Laboratory module. Virts finished installing robotic workstation equipment in the Cupola. Behnken and Partick transferred their spacesuits back to the shuttle for return to Earth. The crew received a phone call from President Barack Obama and several schoolchildren. Zamka and Virts used the shuttle’s thrusters to reboost the space station.
The next day, after holding a news conference with reporters on the ground, shuttle commander Zamka and station commander Williams held a ribbon-cutting ceremony to formally declare Tranquility and the cupola open for business. After a final meal together, the two crews held a farewell ceremony, returned to their respective spacecraft, and closed the hatches.
The space station seen from Endeavour during the fly-around with the Tranquility and cupola modules. Endeavour as seen from the space station during the fly-around, with a now empty payload bay. Endeavour touches down at NASA’s Kennedy Space Center in Florida. Workers ensure that Endeavour is safe after landing. The STS-130 astronauts pose on the runway at NASA’s Kennedy Space Center in Florida. The welcome home ceremony for the STS-130 crew at Ellington Field in Houston. On flight day 13, with Virts at the controls, Endeavour undocked from the space station, having spent nearly 10 days as a single spacecraft. The astronauts used the shuttle’s arm and boom sensors to perform a late inspection of Endeavour’s thermal protection system. On flight day 14, Zamka and Virts tested the orbiter’s reaction control system thrusters and flight control surfaces in preparation for the next day’s entry and landing.
On Feb. 22, Hire and Robinson closed Endeavour’s payload bay doors. The six astronauts donned their launch and entry suits and strapped themselves into their seats. Zamka and Virts fired Endeavour’s two Orbital Maneuvering System engines to bring them out of orbit and Zamka guided Endeavour to a smooth touchdown at Kennedy’s Shuttle Landing Facility. The landing capped off a successful mission of 13 days, 18 hours, six minutes and 217 orbits of the Earth. Workers at Kennedy towed Endeavour to the processing facility to prepare it for its next and final flight, STS-134 in May 2011, and the astronauts returned to Houston for a welcoming ceremony at Ellington Field.
Watch the crew narrate a video about the STS-130 mission.
Read More
Explore More
10 min read 15 Years Ago: STS-129 Delivers Cargo on the Third Utilization and Logistics Flight
Article 3 months ago 11 min read 15 Years Ago: STS-128 Delivers Cargo to Enable Six-Person Space Station Crew
Article 6 months ago 13 min read 15 Years Ago: STS-127 Delivers Japanese External Platform to Space Station
Article 7 months ago View the full article
-
-
Check out these Videos
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.