Jump to content

NASA’s Juno to Get Close Look at Jupiter’s Volcanic Moon Io on Dec. 30


NASA

Recommended Posts

  • Publishers
1-pia26234-io-flyby-image2.jpg?w=1975
This image revealing the north polar region of the Jovian moon Io was taken on October 15 by NASA’s Juno. Three of the mountain peaks visible in the upper part of image, near the day-night dividing line, were observed here for the first time by the spacecraft’s JunoCam.
Image data: NASA/JPL-Caltech/SwRI/MSSS, Image processing by Ted Stryk

The orbiter has performed 56 flybys of Jupiter and documented close encounters with three of the gas giant’s four largest moons.

NASA’s Juno spacecraft will on Tuesday, Dec. 30, make the closest flyby of Jupiter’s moon Io that any spacecraft has made in over 20 years. Coming within roughly 930 miles (1,500 kilometers) from the surface of the most volcanic world in our solar system, the pass is expected to allow Juno instruments to generate a firehose of data.

“By combining data from this flyby with our previous observations, the Juno science team is studying how Io’s volcanoes vary,” said Juno’s principal investigator, Scott Bolton of the Southwest Research Institute in San Antonio, Texas. “We are looking for how often they erupt, how bright and hot they are, how the shape of the lava flow changes, and how Io’s activity is connected to the flow of charged particles in Jupiter’s magnetosphere.”

A second ultra-close flyby of Io is scheduled for Feb. 3, 2024, in which Juno will again come within about 930 miles (1,500 kilometers) of the surface.

The spacecraft has been monitoring Io’s volcanic activity from distances ranging from about 6,830 miles (11,000 kilometers) to over 62,100 miles (100,000 kilometers), and has provided the first views of the moon’s north and south poles. The spacecraft has also performed close flybys of Jupiter’s icy moons Ganymede and Europa.

This JunoCam image of Jupiter’s moon Io captures a plume of material ejected from the (unseen) volcano Prometheus. Indicated by the red arrow, the plume is just visible in the darkness below the terminator (the line dividing day and night). The image was taken by NASA’s Juno spacecraft on June 15.
This JunoCam image of Jupiter’s moon Io captures a plume of material ejected from the (unseen) volcano Prometheus. Indicated by the red arrow, the plume is just visible in the darkness below the terminator (the line dividing day and night). The image was taken by NASA’s Juno spacecraft on October 15.
NASA/JPL-Caltech/SwRI/MSSS

“With our pair of close flybys in December and February, Juno will investigate the source of Io’s massive volcanic activity, whether a magma ocean exists underneath its crust, and the importance of tidal forces from Jupiter, which are relentlessly squeezing this tortured moon,” said Bolton.

Now in the third year of its extended mission to investigate the origin of Jupiter, the solar-powered spacecraft will also explore the ring system where some of the gas giant’s inner moons reside.

Picture This

All three cameras aboard Juno will be active during the Io flyby. The Jovian Infrared Auroral Mapper (JIRAM), which takes images in infrared, will be collecting the heat signatures emitted by volcanoes and calderas covering the moon’s surface. The mission’s Stellar Reference Unit (a navigational star camera that has also provided valuable science) will obtain the highest-resolution image of the surface to date. And the JunoCam imager will take visible-light color images.

JunoCam was included on the spacecraft for the public’s engagement and was designed to operate for up to eight flybys of Jupiter. The upcoming flyby of Io will be Juno’s 57th orbit around Jupiter, where the spacecraft and cameras have endured one of the solar system’s most punishing radiation environments.

“The cumulative effects of all that radiation has begun to show on JunoCam over the last few orbits,” said Ed Hirst, project manager of Juno at NASA’s Jet Propulsion Laboratory in Southern California. “Pictures from the last flyby show a reduction in the imager’s dynamic range and the appearance of ‘striping’ noise. Our engineering team has been working on solutions to alleviate the radiation damage and to keep the imager going.”

More Io, Please

After several months of study and assessment, the Juno team adjusted the spacecraft’s planned future trajectory to add seven new distant Io flybys (for a total of 18) to the extended mission plan. After the close Io pass on Feb. 3, the spacecraft will fly by Io every other orbit, with each orbit growing progressively more distant: The first will be at an altitude of about 10,250 miles (16,500 kilometers) above Io, and the last will be at about 71,450 miles (115,000 kilometers).

The gravitational pull of Io on Juno during the Dec. 30 flyby will reduce the spacecraft’s orbit around Jupiter from 38 days to 35 days. Juno’s orbit will drop to 33 days after the Feb. 3 flyby.

After that, Juno’s new trajectory will result in Jupiter blocking the Sun from the spacecraft for about five minutes at the time when the orbiter is at its closest to the planet, a period called perijove. Although this will be the first time the solar-powered spacecraft has encountered darkness since its flyby of Earth in October 2013, the duration will be too short to affect its overall operation. With the exception of the Feb. 3 perijove, the spacecraft will encounter solar eclipses like this during every close flyby of Jupiter from now on through the remainder of its extended mission, which ends in late 2025.

Starting in April 2024, the spacecraft will carry out a series of occultation experiments that use Juno’s Gravity Science experiment to probe Jupiter’s upper atmospheric makeup, which provides key information on the planet’s shape and interior structure.

More About the Mission

JPL, a division of Caltech in Pasadena, California, manages the Juno mission for the principal investigator, Scott J. Bolton, of the Southwest Research Institute in San Antonio. Juno is part of NASA’s New Frontiers Program, which is managed at NASA’s Marshall Space Flight Center in Huntsville, Alabama, for the agency’s Science Mission Directorate in Washington. Lockheed Martin Space in Denver built and operates the spacecraft.

More information about Juno is available at:

https://www.nasa.gov/juno

News Media Contacts

DC Agle
Jet Propulsion Laboratory, Pasadena, Calif.
818-393-9011
agle@jpl.nasa.gov

Karen Fox / Alana Johnson
NASA Headquarters, Washington
301-286-6284 / 202-358-1501
karen.c.fox@nasa.gov / alana.r.johnson@nasa.gov

Deb Schmid
Southwest Research Institute, San Antonio
210-522-2254
dschmid@swri.org

2023-188

View the full article

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By European Space Agency
      Image: Concordia is a research station in Antarctica that places you farther away from humankind than even the International Space Station. Every year, ESA sponsors a medical doctor to spend a year, or "winterover," at Concordia station. This year, our medical doctor is Jessica Kehala Studer, who is seen in this picture gazing at the Moon and the vast expanse of Antarctica. Around May, the Sun dips below the horizon for the last time, and the crew experiences four months of total darkness, with temperatures dropping to –80°C in winter. 
      The station serves as an analogue for space, mirroring the challenges and conditions faced by astronauts such as isolation, extreme cold and darkness, along with their impact on  health. Concordia is a unique platform for research in human physiology and psychology, as well as astronomy, meteorology, glaciology and other fields. 
      Last Saturday, we celebrated Moon Day: 55 years ago on 20 July 1969, humankind stepped on the Moon for the first time during the Apollo 11 mission. Today, ESA is a key part of NASA's Artemis programme which aims to return humans to the Moon. The insights gained from ESA's experience in analogue facilities such as Concordia will be invaluable for this mission. 
      Find out more about Concordia on our blog. 
      View the full article
    • By NASA
      In July 1968, much work still remained to meet the goal President John F. Kennedy set in May 1961, to land a man on the Moon and return him safely to the Earth before the end of the decade. No American astronaut had flown in space since the November 1966 flight of Gemini XII, the delay largely a result of the tragic Apollo 1 fire. Although the Apollo spacecraft had successfully completed several uncrewed test flights, the first crewed mission still lay three months in the future. The delays in getting the Lunar Module (LM) ready for its first flight caused schedule concerns, but also presented an opportunity for a bold step to send the second crewed Apollo mission, the first crewed flight of the Saturn V, on a trip to orbit the Moon. Using an incremental approach, three flights later NASA accomplished President Kennedy’s goal.
      Left: The charred remains of the Apollo 1 spacecraft following the tragic fire that claimed the lives of astronauts Virgil I. “Gus” Grissom, Edward H. White, and Roger B. Chaffee. Middle left: The first launch of the Saturn V rocket on the Apollo 4 mission. Middle right: The first Lunar Module in preparation for the Apollo 5 mission. Right: Splashdown of Apollo 6, the final uncrewed Apollo mission.
      The American human spaceflight program suffered a jarring setback on Jan. 27, 1967, with the deaths of astronauts Virgil I. Grissom, Edward H. White, and Roger B. Chaffee in the Apollo 1 fire. The fire and subsequent Investigation led to wholesale changes to the spacecraft, such as the use of fireproof materials and redesign of the hatch to make it easy to open. The early Block I spacecraft, such as Apollo 1, would now only be used for uncrewed missions, with crews flying only aboard the more advanced Block II spacecraft. The fire and its aftermath also led to management changes. For example, George M. Low replaced Joseph F. Shea as Apollo Spacecraft Program Manager. The first Apollo mission after the fire, the uncrewed Apollo 4 in November 1967, included the first launch of the Saturn V Moon rocket as well as a 9-hour flight of a Block I Command and Service Module (CSM). Apollo 5 in January 1968 conducted the first uncrewed test of the LM, and despite a few anomalies, managers considered it successful enough that they canceled a second uncrewed flight. The April 1968 flight of Apollo 6, planned as a near-repeat of Apollo 4, encountered several significant anomalies such as first stage POGO, or severe vibrations, and the failure of the third stage to restart, leading to an alternate mission scenario. Engineers devised a solution to the POGO problem and managers decided that the third flight of the Saturn V would carry a crew.
      Left: Apollo 7 astronauts R. Walter Cunningham, left, Donn F. Eisele, and Walter M. Schirra participate in water egress training. Middle: Workers stack the Apollo 7 spacecraft on its Saturn IB rocket at Launch Pad 34. Right: Schirra, left, Cunningham, and Eisele stand outside the spacecraft simulator.
      As of July 1968, NASA’s plan called for two crewed Apollo flights in 1968 and up to five in 1969 to achieve the first lunar landing to meet President Kennedy’s deadline, with each mission incrementally building on the success of the previous ones. The first mission, Apollo 7, would return American astronauts to space following a 23-month hiatus. Planned for October 1968, the crew of Walter M. Schirra, Donn F. Eisele, and R. Walter Cunningham would launch atop a Saturn IB rocket and conduct a shakedown flight of the Block II CSM in Earth orbit, including testing the Service Propulsion System engine, critical on later lunar missions for getting into and out of lunar orbit. The flight plan remained open-ended, but managers expected to complete a full-duration 11-day mission, ending with a splashdown in the Atlantic Ocean. Preparations for Apollo 7 proceeded well during the summer of 1968. Workers had stacked the two-stage Saturn IB rocket on Launch Pad 34 back in April. In KSC’s Manned Spacecraft Operations Building (MSOB), Schirra, Eisele, and Cunningham completed altitude chamber tests of their spacecraft, CSM-101, on July 26 followed by their backups three days later. Workers trucked the spacecraft to the launch pad on Aug. 9 for mating with the rocket. Among major milestones, Schirra, Eisele, and Cunningham completed water egress training in the Gulf of Mexico on Aug. 5, in addition to spending time in the spacecraft simulators at KSC and at the Manned Spacecraft Center (MSC), now NASA’s Johnson Space Center in Houston.
      Left: The original Apollo 8 crew of Russell L. Schweickart, left, David R. Scott, and James A. McDivitt during training in June 1968. Middle: Lunar Module-3 arrives at NASA’s Kennedy Space Center (KSC) in Florida in June 1968. Right: In July 1968, workers in KSC’s Vehicle Assembly Building stack the Saturn V rocket for the Apollo 8 mission.
      The second flight, targeting a December 1968 launch, would feature the first crewed launch of the Saturn V rocket. The Apollo 8 crew of James A. McDivitt, David R. Scott, and Russell L. Schweickart would conduct the first crewed test of the LM in the relative safety of low Earth orbit. McDivitt and Schweickart would fly the LM on its independent mission, including separating the ascent stage from the descent stage to simulate a takeoff from the Moon, while Scott remained in the CSM. After redocking, Schweickart would conduct a spacewalk to practice an external transfer between the two vehicles. Workers completed stacking the three-stage Saturn V rocket (SA-503) in KSC’s Vehicle Assembly Building (VAB) on Aug. 14. The first component of the spacecraft, LM-3, arrived at KSC on June 9, while CSM-103, arrived on Aug. 12. Workers in the MSOB began to prepare both spacecraft for flight.
      Left: The original Apollo 9 crew of William A. Anders, left, Michael Collins, and Frank Borman during training in March 1968. Middle: Lunar Module-3 during preflight processing at NASA’s Kennedy Space Center (KSC) in Florida in August 1968. Right: Following the revision of the mission plans for Apollo 8 and 9 and crew changes, the Apollo 8 crew of James A. Lovell, Anders, and Borman stand before their Saturn V rocket as it rolls out of KSC’s Vehicle Assembly Building in October 1968.
      The third flight, planned for early 1969, and flown by Frank Borman, Michael Collins, and William A. Anders, would essentially repeat the Apollo 8 mission, but at the end would fire the SPS engine to raise the high point of their orbit to 4,600 miles and then simulate a reentry at lunar return velocity to test the spacecraft’s heat shield. On July 23, Collins underwent surgery for a bone spur in his neck, and on August 8, NASA announced that James A. Lovell from the backup crew would take his place. Later missions in 1969 would progress to sending the CSM and LM combination to lunar orbit, leading to the first landing before the end of the year. Construction of the rocket and spacecraft components for these future missions continued at various contractor facilities around the country.
      Left: In Mission Control during the Apollo 6 mission, Director of Flight Crew Operations Christopher C. Kraft, left, Director of the Manned Spacecraft Center, now NASA’s Johnson Space Center in Houston Robert R. Gilruth, and Apollo Spacecraft Program Manager George M. Low. Middle left: Chief of Flight Crew Operations Donald K. “Deke” Slayton. Middle right: Director of NASA’s Kennedy Space Center in Florida Kurt H. Debus. Right: Director of NASA’s Marshall Space Flight Center in Huntsville, Alabama.
      Challenges to this plan began to arise in June 1968. Managers’ biggest concern centered around the readiness of LM-3. After its delivery to KSC on June 9, managers realized the vehicle needed much more work than anticipated and it would not meet the planned December Apollo 8 launch date. Best estimates put its flight readiness no earlier than February 1969. That kind of delay would jeopardize meeting President Kennedy’s fast-approaching deadline. To complicate matters, intelligence reports indicated that the Soviets were close to sending cosmonauts on a trip around the Moon, possibly before the end of the year, and also preparing to test a Saturn V-class rocket for a Moon landing mission.
      Apollo Spacecraft Program Manager Low formulated a plan both audacious and risky. Without a LM, an Earth orbital Apollo 8 mission would simply repeat Apollo 7’s and not advance the program very much. By sending the CSM on a mission around the Moon, or even to orbit the Moon, NASA would gain valuable experience in navigation and communications at lunar distances. To seek management support for his plan, on Aug. 9 Low met with MSC Director Robert R. Gilruth, who supported the proposal. They called in Christopher C. Kraft, director of flight operations, for his opinion. Two days earlier, Low had asked Kraft to assess the feasibility of a lunar orbit mission for Apollo 8, and Kraft deemed it achievable from a ground control and spacecraft computer standpoint. Chief of Flight Crew Operations Donald K. “Deke” Slayton joined the discussion, and all agreed to seek support for the plan from the directors of KSC and of NASA’s Marshall Space Flight Center (MSFC) in Huntsville, Alabama, as well as NASA Headquarters (HQ) in Washington, D.C. That afternoon, the four flew to Huntsville and met with MSFC Director Wernher von Braun, KSC Director Kurt H. Debus, and HQ Apollo Program Director Samuel C. Phillips. By the end of the meeting, the group identified no insurmountable technical obstacles to the lunar mission plan, with the qualification that the Apollo 7 mission in October concluded successfully. Von Braun had confidence that the Saturn V would perform safely, and Debus believed KSC could support a December launch.
      Slayton called Borman, who was with Lovell and Anders conducting tests with their spacecraft in Downey, California. He ordered Borman to immediately fly to Houston, where he offered him command of the new circumlunar Apollo 8 mission, which Borman accepted. His crew would swap missions with McDivitt’s, who agreed to fly an Earth orbital test of the LM in February 1969, putting that crew’s greater experience with the LM to good use. The training challenge fell on Borman’s crew, who now had just four months to train for a flight around the Moon.
      Left: Apollo Program Director Samuel C. Phillips. Middle left: Associate Administrator for Manned Space Flight George E. Mueller. Middle right: Deputy Administrator Thomas O. Paine. Right: Administrator James E. Webb.
      On Aug. 14, representatives from MSC, MSFC, and KSC attended a meeting in Washington with NASA Deputy Administrator Thomas O. Paine and Apollo Program Director Phillips, the senior Headquarters officials present as NASA Administrator James E. Webb and Associate Administrator for Manned Space Flight George E. Mueller attended a conference in Vienna. The group discussed Low’s proposal and agreed on the technical feasibility of accomplishing a circumlunar flight with Apollo 8 in December. During the discussion, Mueller happened to call from Vienna and when they presented him with the proposal, he was at first reticent, especially since NASA had yet to fly Apollo 7. He requested more information and more time to consider the proposal so he could properly brief Webb. Paine then polled each center director for his overall assessment. Von Braun, who designed the Saturn V rocket, stated that whether it went to the Moon or stayed in Earth orbit didn’t matter too much. Debus stated that KSC could support a Saturn V launch in December – as noted above, his team was already processing both the rocket and the spacecraft. Gilruth agreed that the proposal represented a key step in achieving President Kennedy’s goal, and emphasized that the mission should not just loop around the Moon but actually enter orbit. Following additional discussions after Webb’s return from Vienna, he agreed to the plan, but would not make a formal decision until after a successful Apollo 7 flight in October. NASA kept the lunar orbit plan quiet even as the crews began training for their respective new missions. An announcement on Aug. 19 merely stated that Apollo 8 would not carry a LM, as the agency continued to assess various mission objectives. Ultimately, the plan required President Lyndon B. Johnson’s approval.
      Left: Astronaut Neil A. Armstrong ejects just moments before his Lunar Landing Research Vehicle crashed. Middle left: Pilot Gerald P. Gibbons, left, and astronaut James B. Irwin prepare to enter an altitude chamber for one of the Lunar Module Test Article-8 (LTA-8) vacuum tests. Middle right: Astronauts Joe H. Engle, left, Vance D. Brand, and Joseph P. Kerwin preparing for the 2TV-1 altitude test. Right: One of the final Apollo parachute tests.
      As those discussions took place, work around the country continued to prepare for the first lunar landing, not without some setbacks. On May 8, astronaut Neil A. Armstrongejected just in the nick of time as the Lunar Landing Research Vehicle (LLRV) he was piloting went out of control and crashed. Managers suspended flights of the LLRV and its successor, the Lunar Landing Training Vehicle (LLTV), until Oct. 3. Astronauts used the LLRV and LLTV to train for the final few hundred feet of the descent to the Moon’s surface. On May 27, astronaut James B. Irwin and pilot Gerald P. Gibbons began a series of altitude tests in Chamber B of the Space Environment Simulation Laboratory (SESL) at MSC. The tests, using the LM Test Article-8 (LTA-8), evaluated the pressure integrity of the LM as well as the new spacesuits designed for the Apollo program. The first series of LTA-8 tests supported the Earth-orbital flight of LM-3 on Apollo 9 while a second series in October and November supported the LM-5 flight of Apollo 11, the first lunar landing mission. In June, using SESL’s Chamber A, astronauts Joseph P. Kerwin, Vance D. Brand, and Joe H. Engle completed an eight-day thermal vacuum test using the Apollo 2TV-1 spacecraft to certify the vehicle for Apollo 7. A second test in September certified the vehicle for lunar missions. July 3 marked the final qualification drop test of the Apollo parachute system, a series begun five years earlier. The tests qualified the parachutes for Apollo 7.
      History records that Apollo 11 accomplished the first human landing on the Moon in July 1969. It is remarkable to think that just one year earlier, with the agency still recovering from the Apollo 1 fire, NASA had not yet flown any astronauts aboard an Apollo spacecraft. And further, the agency took the bold step to plan for a lunar orbital mission on just the second crewed mission. With a cadence of a crewed Apollo flight every two months between October 1968 and July 1969, NASA accomplished President Kennedy’s goal of landing a man on the Moon and returning him safely to the Earth.
      John Uri
      NASA Johnson Space Center
      View the full article
    • By Amazing Space
      What If We Nuked The Moon?
    • By NASA
      2 Min Read Exploring the Moon: Episode Previews
      Extravehicular Activity and Human Surface Mobility Program Discover. Learn. Explore.

      NASA’s video series, Exploring the Moon, takes a “behind-the-scenes” look at humanity’s next steps on the Moon. Here is your first look at some of the key moments from the upcoming series! Scroll down or navigate through CONTENTS, to the side, to explore!
      To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
      Who, What, When, Where, Why, and How…

      How many small steps equal a giant leap? Find out what it takes to plan our next great voyage to the Moon, what exactly we plan to do there, and what may come next.
      We went to the Moon fifty years ago, but we only explored a very small part of the Moon.
      Nujoud Merancy
      Exploration Systems Strategy & Architecture Lead

      Going to the Moon Won’t Be Easy…

      To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
      Episode 01: Why Explore the Moon? Exploring the Moon Series Next-Generation Spacesuits

      Explore the special technologies and improvements NASA has made to its spacesuits since the International Space Station (ISS), and how they will be used to make Artemis mission possible​.
      Basically you should think of a spacesuit as a human-shaped spacecraft.
      Liana Rodriggs
      Spacesuit Expert

      Advancements in Mobility

      To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
      Episode 02: Artemis SpacesuitsExploring the Moon Series Spacesuits. How do they work?

      To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
      Episode 02: Artemis SpacesuitsExploring the Moon Series Spacewalks: Microgravity vs Planetary

      To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
      Episode 02: Artemis SpacesuitsExploring the Moon Series Lunar Rovers

      Buckle up and roll out! Learn all about the different capabilities crewed and uncrewed rovers have. Plus, find out how these technologies will be used to explore the lunar surface.
      We are taking the ability to transport crew and tools. And these rovers that can operate independent of the crew.
      Nathan Howard
      Lunar Rovers Expert

      Reinventing the Wheel: Apollo to Artemis

      To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
      Episode 03: Lunar RoversExploring the Moon Series Simulating the Mission

      To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
      Episode 03: Lunar RoversExploring the Moon Series Lunar Geology Tools

      How does NASA collect surface samples from the Moon? The answer may surprise you! Explore the challenges of designing the geology sampling equipment for the Artemis missions and how geology sampling technology has changed since Apollo missions.​
      In order to take these samples on the Moon you need something to pick these samples up with. You can't just walk around and pick them up by hand, that is why we make geology tools.
      Holly Newton
      Lunar Geology Tools Expert

      Lessons Learned from Apollo

      To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
      Episode 04: Lunar Geology ToolsExploring the Moon Series Breakthrough! The Ingenuity of Artemis Tools

      To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
      Episode 04: Lunar Geology ToolsExploring the Moon Series It’s All In The Finer Details…

      To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
      Episode 04: Lunar Geology ToolsExploring the Moon Series Special Lunar Challenges

      Learn how NASA engineers are working to prepare for the unique challenges astronauts will face when exploring the Lunar South Pole for the first time ever.
      There are parts of the Moon and craters that have not seen the Sun in over a billion years.
      Ben Greene
      EVA Development Manager

      The Challenges Ahead

      To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
      Episode 05: Special Lunar ChallengesExploring the Moon Series Dust. Gets. Everywhere.

      To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
      Episode 05: Special Lunar ChallengesExploring the Moon Series Exploring the South Pole of the Moon

      To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video
      Episode 05: Special Lunar ChallengesExploring the Moon Series Back to the "Exploring the Moon" Main Page Keep Exploring Discover More Topics From NASA
      Missions
      Humans in Space
      Climate Change
      Solar System
      View the full article
    • By NASA
      Image data: NASA/JPL-Caltech/SwRI/MSSS
      Image processing by Gary Eason © CC BY During its 61st close flyby of Jupiter on May 12, 2024, NASA’s Juno spacecraft captured this color-enhanced view of the giant planet’s northern hemisphere. It provides a detailed view of chaotic clouds and cyclonic storms in an area known to scientists as a folded filamentary region. In these regions, the zonal jets that create the familiar banded patterns in Jupiter’s clouds break down, leading to turbulent patterns and cloud structures that rapidly evolve over the course of only a few days.
      Citizen scientist Gary Eason made this image using raw data from the JunoCam instrument, applying digital processing techniques to enhance color and clarity.
      At the time the raw image was taken, the Juno spacecraft was about 18,000 miles (29,000 kilometers) above Jupiter’s cloud tops, at a latitude of about 68 degrees north of the equator.
      JunoCam’s raw images are available for the public to peruse and process into image products at https://missionjuno.swri.edu/junocam/processing. More information about NASA citizen science can be found at https://science.nasa.gov/citizenscience and https://www.nasa.gov/solve/opportunities/citizenscience.
      More information about Juno is at https://www.nasa.gov/juno and https://missionjuno.swri.edu. For more about this finding and other science results, see https://www.missionjuno.swri.edu/science-findings.
      View the full article
  • Check out these Videos

×
×
  • Create New...