Jump to content

Recommended Posts

  • Publishers
Posted

4 min read

Helio Highlights: June 2025

4 Min Read

Helio Highlights: June 2025

NASA's Parker Solar Probe -- with its heat shield facing forward and twin solar panels partially extended -- flies through particles in space.
An artist’s interpretation of the Parker Solar Probe flying through the corona.
Credits:
NASA

Two Stars in Solar Science

It takes a lot of work to make space missions happen. Hundreds or even thousands of experts work as a team to put together the spacecraft. Then it has to be tested in conditions similar to space, to be sure that it can survive out there once it is launched. Fixing big issues that pop up after launch is either impossible or very difficult, so it is important that everything works before the mission gets to space.

The Parker Solar Probe and Solar Orbiter missions study the Sun from different points of view. Parker is led by NASA and was built to fly into the upper atmosphere of the Sun, called the corona. Solar Orbiter is led by the European Space Agency (ESA) and has gotten our first peek at the Sun’s poles. Together, they both provide a deeper understanding of the Sun and how it affects the rest of the solar system.

A New Way of Seeing

It takes a lot of teamwork to build and launch any space mission, and Solar Orbiter was no different. It also had to go through a lot of testing in conditions similar to outer space before it made its final journey to the launch site.

The Solar Orbiter mission has taken the highest-ever-resolution images of the Sun and recently sent back the first ever close-up images of the Sun’s poles. It has also studied the solar wind to see what it is made of and helped scientists find out where on the Sun the solar wind comes from. Working hand-in-hand with Parker, it has also shown how the solar wind gets a magnetic “push” that increases its total speed.

Solar_Orbiter_instruments.jpg?w=8000&h=4
An infographic showing the ten scientific instruments carried aboard Solar Orbiter
European Space Agency

To get all of this done, the spacecraft carries ten different scientific instruments on its voyage around the Sun. These instruments work together to provide a total overview of our star. Six of them are remote-sensing instruments (above in gold), which “see” the Sun and return imagery to Earth. The other four are what’s called in-situ instruments (above in pink), which measure the environment all  around the spacecraft. This includes the solar wind, and the electric and magnetic fields embedded within it.

Faster and Closer Than Ever Before

The Parker Solar Probe was named for Dr. Eugene N. Parker, who pioneered our modern understanding of the Sun. In the mid-1950s, Parker developed a theory that predicted the solar wind. The probe named after him is designed to swoop within 4 million miles (6.5 million kilometers) of the Sun’s surface to trace its energy flow, to study the heating of the corona, and to explore what accelerates the solar wind.

To get all this done, the probe has to survive the blazing hot corona. It can get up to about 2 million °F (1.1 million °C)!  Parker uses high-tech thermal engineering to protect itself, including an eight-foot diameter heat shield called the Thermal Protection System (TPS). The TPS is made of two panels of carbon composite with a lightweight 4.5-inch-thick carbon foam core. This heat shield sandwich keeps things about 85 °F (29 °C) in its shadow, even though the Sun-facing side reaches about 2,500 °F (1,377 °C)!

In 2018, the Parker Solar Probe became the fastest spacecraft ever built, at about 430,000 miles per hour (700,000 kilometers per hour). It also got seven times closer to the Sun than any other spacecraft, getting within 3.8 million miles (6.2 million kilometers). It made this record-breaking close encounter on Christmas Eve of 2024.

From Yesterday to Tomorrow

The Parker Solar Probe was launched on August 12, 2018, and Solar Orbiter was launched on February 10, 2020. Both of them took off from Cape Canaveral Air Station in Florida. Some pieces of Solar Orbiter were transported in trucks, but the completed spacecraft made the journey from Europe to the U.S. on a gigantic Antonov cargo plane designed especially for transporting spacecraft.

Together, these spacecraft have done a lot to improve our knowledge of the Sun. Both missions are currently in their main operational phase, with projected end-of-mission sometime in 2026, and could continue returning data for a few years to come.

Here are more resources about these missions

View the full article

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By NASA
      NASA Selects 2025 Astronaut Candidates
    • By NASA
      NASA Prelaunch News Conference on Three New Space Weather Missions (Sept. 21, 2025)
    • By NASA
      NASA Science News Conference on Three New Space Weather Missions (Sept. 21, 2025)
    • By European Space Agency
      Week in images: 08-12 September 2025
      Discover our week through the lens
      View the full article
    • By NASA
      NSTGRO Homepage
      Andrew Arends
      University of California, Davis
      Astronaut-Powered Laundry Machine
      Allan Attia
      Stanford University
      Computational Modeling of Lithium Magnetoplasmadynamic Thruster for Nuclear Electric Propulsion
      Michael Auth
      University of California, Santa Barbara
      Non-Contact, Real-Time Diagnostics of Battery Aging in 18650 Cells During the Lunar Night Using Acoustic Spectroscopy
      Nicholas Brennan
      Cornell University
      Spin Wave-Based Neuromorphic Coprocessor for Advanced AI Applications
      John Carter
      Purdue University
      Spectroscopic Measurements and Kinetic Modeling of Non-Boltzmann CN for Entry Systems Modeling
      Thomas Clark
      University of Colorado, Boulder
      Data-Driven Representations of Trajectories in Cislunar Space
      Nicholas Cmkovich
      University of Wisconsin-Madison
      Development of Radiation Tolerant Additively Manufactured Refractory Compositionally Complex Alloys
      Kara Hardy
      Michigan Technological University
      Design and Optimization of Cuttlebone-Inspired Cellular Materials Using Turing Systems
      Tyler Heggenes
      Utah State University
      Mitigating Spacecraft Charging Issues Through High-Precision, Temperature-Dependent Measurements of Dynamic Radiation Induced Conductivity
      Joseph Hesse-Withbroe
      University of Colorado, Boulder
      Decreasing Astronaut Radiation Doses with Magnetic Shields
      Niya Hope-Glenn
      Massachusetts Institute of Technology
      Investigating the Selectivity of CO2 Hydrogenation to Ethylene in a Plasma Reactor for Mars ISRU
      Adrianna Hudyma
      University of Minnesota
      Biorthogonal Translation System for Production of Pharmaceuticals During Space Missions
      Tushaar Jain
      Carnegie Mellon University
      Towards On-Demand Planetary Landing Through On-Board Autonomous Mapping and Cross-Modality Map Relative Localization
      Devin Johnson
      Purdue University
      Numerical and Experimental Methodology to Optimize Propellant Injection, Mixing, and Response in Rotating Detonation Engines
      Jack Joshi
      University of Texas at Austin
      State Representations for Measurement Fusion and Uncertainty Propagation in Cislunar Regime
      John Knoll
      William Marsh Rice University
      Dexterous Manipulation via Vision-Intent-Action Models
      Joseph Ligresti
      Purdue University
      Effects of Vacuum Conditions on FORP Reactivity and Long-Term Viability of MON-25/MMH Thrusters
      Alexander Madison
      University of Central Florida
      Hybrid Microwave Sintering of Lunar Regolith with 2.45GHz and 18-28GHz
      Aurelia Moriyama-Gurish
      Yale University
      Investigating Fundamental High Strain Rate Deformation Mechanisms to Bridge the Experiment-Computation Gap and Local Thermal Shock Response in C103
      Sophia Nowak
      University of Wisconsin-Madison
      Pulsed Laser System for Calibration of High Resolution X-ray Microcalorimeters
      Jacob Ortega
      Missouri University of Science and Technology
      Forging the Future Lunar Settlement with In-Situ Aluminum Extraction
      John Riley O’Toole
      University of Michigan
      Laser-Based Measurements of Electron Properties in Hall Effect Thrusters with Non-Conventional Propellants Enabling for Cis-Lunar, Mars, and Deep Space Missions
      Cort Reinarz
      Texas A&M University
      Utilizing Biometrics in Closed-Loop Compression Garment Systems as a Countermeasure for Orthostatic Intolerance
      Erica Sawczynec
      University of Texas at Austin
      A Monolithic Cross-Dispersed Grism for Near-Infrared Spectroscopy
      Ingrid Shan
      California Institute of Technology
      Micro-Architected Metallic Lattices for Lunar Dust Mitigation
      Pascal Spino
      Massachusetts Institute of Technology
      Centimeter-Scale Robots for Accessing Europa’s Benthic Zone
      Benjamin Stern
      Northwestern University, Chicago
      A Near-Field Thermoreflectance Approach for Nanoscale Thermal Mapping on Nanostructured Sige
      Titus Szobody
      William Marsh Rice University
      Leveraging Polymeric Photochemistry in Ionic Liquid-Based Mirror Synthesis for Space Telescope Optics
      Seneca Velling
      California Institute of Technology
      Constraining Weathering Kinetics Under Experimentally Simulated Venus Conditions
      Zhuochen Wang
      Georgia Institute of Technology
      Optimal Covariance Steering on Lie Groups for Precision Powered Descent
      Stanley Wang
      Stanford University
      Compact Robots with Long Reach for Space Exploration and Maintenance Tasks
      Thomas Westenhofer
      University of California, Irvine
      Kinetic Modeling of Carbon Mass Loss in Nuclear Thermal Propulsion
      Andrew Witty
      Purdue University
      Scalable Nanoporous Paints with High Solar Reflectance and Durability in Space Environments
      Jonathan Wrieden
      University of Maryland, College Park
      A Stochastic Model for Predicting Charged Orbital Debris Probability Densities by Utilizing Earth’s Electromagnetic Field to Guide Active Debris Remediation Efforts
      Jasen Zion
      California Institute of Technology
      Large-Format, Fast SNSPD Cameras Benchmarked with Neutral Atom Arrays
      Keep Exploring Discover More Topics From NASA
      Space Technology Mission Directorate
      Space Technology Research Grants
      NASA Space Technology Graduate Research Opportunities (NSTGRO)
      Technology
      Share
      Details
      Last Updated Sep 12, 2025 EditorLoura Hall Related Terms
      Space Technology Research Grants Space Technology Mission Directorate View the full article
  • Check out these Videos

×
×
  • Create New...