Jump to content

Ariane 5 rocket decorated with winning Juice artwork


Recommended Posts

A close up of an Ariane 5 rocket surrounded by scaffolding. In the centre of the Ariane 5 is the sticker showing the artwork (blue background with Jupiter, three icy moons, Earth and Juice. All are smiling and Jupiter is holding Juice in its hands). Below the artwork is an ESA logo and the Juice mission patch (a round design with an outline of the spacecraft). Image: A close up of an Ariane 5 rocket surrounded by scaffolding. In the centre of the Ariane 5 is the sticker showing the artwork (blue background with Jupiter, three icy moons, Earth and Juice. All are smiling and Jupiter is holding Juice in its hands). Below the artwork is an ESA logo and the Juice mission patch (a round design with an outline of the spacecraft).

View the full article

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By NASA
      NASA continued a key RS-25 engine test series for future Artemis flights of the agency’s powerful SLS (Space Launch System) rocket March 22 with a hot fire on the Fred Haise Test Stand at NASA’s Stennis Space Center near Bay St. Louis, Mississippi.NASA/Danny Nowlin Full-duration RS-25 engine hot fireNASA/Danny Nowlin Full-duration RS-25 engine hot fireNASA/Danny Nowlin NASA continued a key RS-25 engine test series for future Artemis flights of the agency’s powerful SLS (Space Launch System) rocket March 22 with a hot fire on the Fred Haise Test Stand at NASA’s Stennis Space Center near Bay St. Louis, Mississippi. It marked the 10th hot fire in a 12-test series to certify production of new RS-25 engines by lead contractor Aerojet Rocketdyne, an L3 Harris Technologies company. The NASA Stennis test team fired the certification engine for 500 seconds, or the same amount of time engines must fire to help launch the SLS rocket to space with astronauts aboard the Orion spacecraft. Operators powered the engine up to a level of 113%, which is beyond the 111% power level new RS-25 engines use to provide additional thrust. Testing up to the 113% power level provides a margin of operational safety. Newly produced engines will power NASA’s SLS rocket on Artemis missions to the Moon and beyond, beginning with Artemis V. For Artemis missions I-IV, NASA and Aerojet Rocketdyne modified 16 former space shuttle engines for use on the SLS rocket. Four RS-25 engines fire simultaneously to help launch each SLS rocket, producing up to 2 million pounds of combined thrust. Through Artemis, NASA will establish the foundation for long-term scientific exploration at the Moon, land the first woman, first person of color, and first international partner astronaut on the lunar surface, and prepare for human expeditions to Mars for the benefit of all. RS-25 tests at NASA Stennis are conducted by a diverse team of operators from NASA, Aerojet Rocketdyne, and Syncom Space Services, prime contractor for site facilities and operations.
      View the full article
    • By NASA
      2 min read
      Preparations for Next Moonwalk Simulations Underway (and Underwater)
      Media are invited to apply for accreditation to attend a pre-launch media day to learn about a sounding rocket mission set to launch from Virginia’s Eastern Shore during the 2024 solar eclipse. The April 2 media day event includes opportunities to hear from subject matter experts, tour the facility, and interview members of the research team. Media day activities will take place on Tuesday, April 2, from 9 a.m.- noon at NASA’s Wallops Flight Facility in Wallops Island, Virginia.
      A sounding rocket launches from White Sands, New Mexico, during the Oct. 14, 2024, annular solar eclipse for the APEP mission.U.S. Army/Judy Hawkins The application deadline for media who are U.S. citizens is Friday, March 29, at 2 p.m. EDT. All media must send their accreditation request to the Wallops Office of Communications.
      Media must arrive at Wallops no later than 9 a.m. on Tuesday, April 2, to complete the badging process prior to the media day tour and interviews.  
      This NASA mission, known as Atmospheric Perturbations around Eclipse Path (APEP), is led by Dr. Aroh Barjatya, a professor of engineering physics at Embry-Riddle Aeronautical University in Daytona Beach, Florida. Three sounding rockets will be launched during the solar eclipse on April 8 to study how the sudden drop in sunlight affects our upper atmosphere. 
      Media Contact
      Amy Barra 
      NASA’s Wallops Flight Facility, Wallops Island, Virginia
      Share
      Details
      Last Updated Mar 20, 2024 EditorJamie AdkinsContactAmy Barraamy.l.barra@nasa.govLocationWallops Flight Facility Related Terms
      Wallops Flight Facility 2024 Solar Eclipse View the full article
    • By NASA
      Key adapters for the first crewed Artemis missions are manufactured at NASA’s Marshall Space Flight Center in Huntsville, Alabama. The cone-shaped payload adapter, left, will debut on the Block 1B configuration of the SLS rocket beginning with Artemis IV, while the Orion stage adapters, right, will be used for Artemis II and Artemis III. NASA/Sam Lott A test version of the SLS (Space Launch System) rocket’s payload adapter is ready for evaluation, marking a critical milestone on the journey to the hardware’s debut on NASA’s Artemis IV mission.
      Comprised of two metal rings and eight composite panels, the cone-shaped payload adapter will be part of the SLS Block 1B configuration and housed inside the universal stage adapter atop the rocket’s more powerful in-space stage, called the exploration upper stage. The payload adapter is an evolution from the Orion stage adapter used in the Block 1 configuration of the first three Artemis missions that sits at the topmost portion of the rocket and helps connect the rocket and spacecraft.
      “Like the Orion stage adapter and the launch vehicle stage adapter used for the first three SLS flights, the payload adapter for the evolved SLS Block 1B configuration is fully manufactured and tested at NASA’s Marshall Space Flight Center in Huntsville, Alabama,” said Casey Wolfe, assistant branch chief for the advanced manufacturing branch at Marshall. “Marshall’s automated fiber placement and large-scale integration facilities provide our teams the ability to build composite hardware elements for multiple Artemis missions in parallel, allowing for cost and schedule savings.”
      Teams at Marshall manufactured, prepared, and move the payload adapter test article. The payload adapter will undergo testing in the same test stand that once housed the SLS liquid oxygen tank structural test article.NASA Teams at Marshall manufactured, prepared, and move the payload adapter test article. The payload adapter will undergo testing in the same test stand that once housed the SLS liquid oxygen tank structural test article.NASA Teams at Marshall manufactured, prepared, and move the payload adapter test article. The payload adapter will undergo testing in the same test stand that once housed the SLS liquid oxygen tank structural test article.NASA Teams at Marshall manufactured, prepared, and move the payload adapter test article. The payload adapter will undergo testing in the same test stand that once housed the SLS liquid oxygen tank structural test article. NASA At about 8.5 feet tall, the payload adapter’s eight composite sandwich panels, which measure about 12 feet each in length, contain a metallic honeycomb-style structure at their thickest point but taper to a single carbon fiber layer at each end. The panels are pieced together using a high-precision process called determinant assembly, in which each component is designed to fit securely in a specific place, like puzzle pieces.
      After manufacturing, the payload adapter will also be structurally tested at Marshall, which manages the SLS Program. The first structural test series begins this spring. Test teams will use the engineering development unit – an exact replica of the flight version of the hardware – to check the structure’s strength and durability by twisting, shaking, and applying extreme pressure.
      While every Block 1B configuration of the SLS rocket will use a payload adapter, each will be customized to fit the mission’s needs. The determinant assembly method and digital tooling ensure a more efficient and uniform manufacturing process, regardless of the mission profile, to ensure hardware remains on schedule. Data from this test series will further inform design and manufacturing processes as teams begin manufacturing the qualification and flight hardware for Artemis IV.
      NASA is working to land the first woman, first person of color, and its first international partner astronaut on the Moon under Artemis. SLS is part of NASA’s backbone for deep space exploration, along with the Orion spacecraft and Gateway in orbit around the Moon and commercial human landing systems, next-generational spacesuits, and rovers on the lunar surface. SLS is the only rocket that can send Orion, astronauts, and supplies to the Moon in a single launch.
      News Media Contact
      Corinne Beckinger
      Marshall Space Flight Center, Huntsville, Ala.
      256.544.0034
      corinne.m.beckinger@nasa.gov
      View the full article
    • By NASA
      2 min read
      Preparations for Next Moonwalk Simulations Underway (and Underwater)
      NASA’s Wallops Flight Facility supported the successful launch of a Rocket Lab Electron rocket at X:XX a.m. EDT, Thursday, March 21, from Virginia’s Mid-Atlantic Regional Spaceport on Wallops Island, Virginia.  
      The rocket carried three collaborative research missions for the National Reconnaissance Office (NRO). The mission, dubbed NROL-123, was the first NRO mission to fly on a Rocket Lab rocket launched from the United States. 
      ​Rocket Lab’s Electron rocket lifts off from NASA’s Wallops Flight Facility March 21, 2024, at X a.m. EDT. The rocket carried small research satellites for the NROL-123 mission for National Reconnaissance Office. NASA/Jamie Adkins “We are proud to support our commercial and government launch partners with world-class launch range, safety and support services,” said David L. Pierce, Wallops Flight Facility director. “It was a picture perfect launch following a smooth countdown.” 
      This was the third Electron launch from Wallops and the fourth launch from Rocket Lab’s Launch Complex-2 in Virginia.  
      The next launch from Wallops is scheduled April 8, 2024, during the solar eclipse. The Atmospheric Perturbations around Eclipse Path (APEP) mission will launch three sounding rockets before, during, and after peak eclipse time to study how the sudden drop in sunlight affects the Earth’s upper atmosphere.  
      NASA’s Wallops Flight Facility provides agile, low-cost flight and launch range services to meet government and commercial sector needs for accessing flight regimes worldwide from the Earth’s surface to the Moon and beyond. Wallops’ flight assets – ranging from research aircraft, unmanned aerial systems, and high-altitude balloons to suborbital and orbital rockets – provide a dynamic range of flight capabilities. In addition, operational launch range and airfield assets at the facility enable science, aerospace, defense, and industry sectors. 
      Share
      Details
      Last Updated Mar 21, 2024 EditorJamie AdkinsContactJeremy Eggers Related Terms
      Wallops Flight Facility View the full article
  • Check out these Videos

×
×
  • Create New...