Members Can Post Anonymously On This Site
-
Similar Topics
-
By NASA
5 min read
Preparations for Next Moonwalk Simulations Underway (and Underwater)
This artist’s concept depicts a potential volcanic moon between the exoplanet WASP-49 b, left, and its parent star. New evidence indicating that a massive sodium cloud observed near WASP-49 b is produced by neither the planet nor the star has prompted researchers to ask if its origin could be an exomoon.NASA/JPL-Caltech The existence of a moon located outside our solar system has never been confirmed but a new NASA-led study may provide indirect evidence for one.
New research done at NASA’s Jet Propulsion Laboratory reveals potential signs of a rocky, volcanic moon orbiting an exoplanet 635 light-years from Earth. The biggest clue is a sodium cloud that the findings suggest is close to but slightly out of sync with the exoplanet, a Saturn-size gas giant named WASP-49 b, although additional research is needed to confirm the cloud’s behavior. Within our solar system, gas emissions from Jupiter’s volcanic moon Io create a similar phenomenon.
Although no exomoons (moons of planets outside our solar system) have been confirmed, multiple candidates have been identified. It’s likely these planetary companions have gone undetected because they are too small and dim for current telescopes to detect.
The sodium cloud around WASP-49 b was first detected in 2017, catching the attention of Apurva Oza, formerly a postdoctoral researcher at NASA’s Jet Propulsion Laboratory and now a staff scientist at Caltech, which manages JPL. Oza has spent years investigating how exomoons might be detected via their volcanic activity. For example, Io, the most volcanic body in our solar system, constantly spews sulfur dioxide, sodium, potassium, and other gases that can form vast clouds around Jupiter up to 1,000 times the giant planet’s radius. It’s possible that astronomers looking at another star system could detect a gas cloud like Io’s even if the moon itself were too small to see.
Exomoons — moons around planets outside our solar system — are most likely too small to observe directly with current technology. In this video, learn how scientists tracked the motion of a sodium cloud 635 light-years away and found that it could be created by volcanos on a potential exomoon. NASA/JPL-Caltech Both WASP-49 b and its star are composed mostly of hydrogen and helium, with trace amounts of sodium. Neither contains enough sodium to account for the cloud, which appears to be coming from a source that is producing roughly 220,000 pounds (100,000 kilograms) of sodium per second. Even if the star or planet could produce that much sodium, it’s unclear what mechanism could eject it into space.
Could the source be a volcanic exomoon? Oza and his colleagues set out to try to answer that question. The work immediately proved challenging because from such a great distance, the star, planet, and cloud often overlap and occupy the same tiny, faraway point in space. So the team had to watch the system over time.
A Cloud on the Move
As detailed in a new study published in the Astrophysical Journal Letters, they found several pieces of evidence that suggest the cloud is created by a separate body orbiting the planet, though additional research is needed to confirm the cloud’s behavior. For example, twice their observations indicated the cloud suddenly increased in size, as if being refueled, when it was not next to the planet.
New NASA-led research suggests a sodium cloud seen around the exoplanet WASP-49 b might be created by a volcanic moon, which is depicted in this artist’s concept. Jupiter’s fiery moon Io produces a similar cloud. NASA/JPL-Caltech They also observed the cloud moving faster than the planet in a way that would seem impossible unless it was being generated by another body moving independent of, and faster, than the planet.
“We think this is a really critical piece of evidence,” said Oza. “The cloud is moving in the opposite direction that physics tells us it should be going if it were part of the planet’s atmosphere.”
While these observations have intrigued the research team, they say they would need to observe the system for longer to be sure of the cloud’s orbit and structure.
A Chance of Volcanic Clouds
For part of their sleuthing, the researchers used the European Southern Observatory’s Very Large Telescope in Chile. Oza’s co-author Julia Seidel, a research fellow at the observatory, established that the cloud is located high above the planet’s atmosphere, much like the cloud of gas Io produces around Jupiter.
They also used a computer model to illustrate the exomoon scenario and compare it to the data. The exoplanet WASP-49 b orbits the star every 2.8 days with clocklike regularity, but the cloud appeared and disappeared behind the star or behind the planet at seemingly irregular intervals. Using their model, Oza and team showed that a moon with an eight-hour orbit around the planet could explain the cloud’s motion and activity, including the way it sometimes seemed to move in front of the planet and did not seem to be associated with a particular region of the planet.
“The evidence is very compelling that something other than the planet and star are producing this cloud,” said Rosaly Lopes, a planetary geologist at JPL who co-authored the study with Oza. “Detecting an exomoon would be quite extraordinary, and because of Io, we know that a volcanic exomoon is possible.”
A Violent End
On Earth, volcanoes are driven by heat in its core left over from the planet’s formation. Io’s volcanoes, on the other hand, are driven by Jupiter’s gravity, which squeezes the moon as it gets closer to the planet then reduces its “grip” as the moon moves away. This flexing heats the small moon’s interior, leading to a process called tidal volcanism.
If WASP-49 b has a moon similar in size to Earth’s, Oza and team estimate that the rapid loss of mass combined with the squeezing from the planet’s gravity will eventually cause it to disintegrate.
“If there really is a moon there, it will have a very destructive ending,” said Oza.
News Media Contact
Calla Cofield
Jet Propulsion Laboratory, Pasadena, Calif.
626-808-2469
calla.e.cofield@jpl.nasa.gov
2024-135
Share
Details
Last Updated Oct 10, 2024 Related Terms
Exoplanets Astrophysics Exoplanet Discoveries Gas Giant Exoplanets Jupiter Jupiter Moons Explore More
4 min read NASA’s Hubble Watches Jupiter’s Great Red Spot Behave Like a Stress Ball
Astronomers have observed Jupiter’s legendary Great Red Spot (GRS), an anticyclone large enough to swallow…
Article 22 hours ago 2 min read Hubble Observes a Peculiar Galaxy Shape
This NASA/ESA Hubble Space Telescope image reveals the galaxy, NGC 4694. Most galaxies fall into…
Article 6 days ago 4 min read Via NASA Plane, Scientists Find New Gamma-ray Emission in Storm Clouds
There’s more to thunderclouds than rain and lightning. Thunderclouds can produce intense bursts of gamma…
Article 1 week ago Keep Exploring Discover Related Topics
Missions
Humans in Space
Climate Change
Solar System
View the full article
-
By European Space Agency
A camera destined for the Moon became part of the astronauts’ toolkit during ESA’s latest PANGAEA geology training in Lanzarote, Spain.
View the full article
-
By NASA
An artist’s concept of NASA’s Europa Clipper spacecraft. Credits: NASA/JPL-Caltech Lee esta nota de prensa en español aquí.
NASA will provide live coverage of prelaunch and launch activities for Europa Clipper, the agency’s mission to explore Jupiter’s icy moon Europa. NASA is targeting launch at 12:31 p.m. EDT Thursday, Oct. 10, on a SpaceX Falcon Heavy rocket from Launch Complex 39A at NASA’s Kennedy Space Center in Florida.
Beyond Earth, Jupiter’s moon Europa is considered one of the solar system’s most promising potentially habitable environments. After an approximately 1.8-billion-mile journey, Europa Clipper will enter orbit around Jupiter in April 2030, where the spacecraft will conduct a detailed survey of Europa to determine whether the icy world could have conditions suitable for life. Europa Clipper is the largest spacecraft NASA has ever developed for a planetary mission. It carries a suite of nine instruments along with a gravity experiment that will investigate an ocean beneath Europa’s surface, which scientists believe contains twice as much liquid water as Earth’s oceans.
For a schedule of live events and the platforms they’ll stream on, visit:
https://go.nasa.gov/europaclipperlive
The deadline for media accreditation for in-person coverage of this launch has passed. NASA’s media credentialing policy is available online. For questions about media accreditation, please email: ksc-media-accreditat@mail.nasa.gov.
NASA’s mission coverage is as follows (all times Eastern and subject to change based on real-time operations):
Tuesday, Oct. 8
1 p.m. – In-person, one-on-one interviews, open to media credentialed for this launch.
3:30 p.m. – NASA’s Europa Clipper science briefing with the following participants:
Gina DiBraccio, acting director, Planetary Science Division, NASA Headquarters Robert Pappalardo, project scientist, Europa Clipper, NASA JPL Haje Korth, deputy project scientist, Europa Clipper, Applied Physics Laboratory (APL) Cynthia Phillips, project staff scientist, Europa Clipper, NASA JPL Coverage of the science news conference will stream live on NASA+ and the agency’s website, Learn how to stream NASA content through a variety of platforms, including social media.
Media may ask questions in person and via phone. Limited auditorium space will be available for in-person participation. For the dial-in number and passcode, media should contact the NASA Kennedy newsroom no later than one hour before the start of the event at: ksc-newsroom@mail.nasa.gov.
Wednesday, Oct. 9
2 p.m. – NASA Social panel at NASA Kennedy with the following participants:
Kate Calvin, chief scientist and senior climate advisor, NASA Headquarters Caley Burke, Flight Design Analyst, NASA’s Launch Services Program Erin Leonard, project staff scientist, Europa Clipper, NASA JPL Juan Pablo León, systems testbed engineer, Europa Clipper, NASA JPL Elizabeth Turtle, principal investigator, Europa Imaging System instrument, Europa Clipper, APL The panel will stream live on NASA Kennedy’s YouTube, X, and Facebook accounts. Members of the public may ask questions online by posting to the YouTube, X, and Facebook live streams or using #AskNASA.
3:30 p.m. – NASA’s Europa Clipper prelaunch news conference (following completion of the Launch Readiness Review), with the following participants:
NASA Associate Administrator Jim Free Sandra Connelly, deputy associate administrator, Science Mission Directorate, NASA Headquarters Tim Dunn, launch director, NASA’s Launch Services Program Julianna Scheiman, director, NASA Science Missions, SpaceX Jordan Evans, project manager, Europa Clipper, NASA JPL Mike McAleenan, launch weather officer, 45th Weather Squadron, U.S. Space Force Coverage of the prelaunch news conference will stream live on NASA+, the agency’s website, the NASA app, and YouTube.
Media may ask questions in person and via phone. Limited auditorium space will be available for in-person participation. For the dial-in number and passcode, media should contact the NASA Kennedy newsroom no later than one hour before the start of the event at ksc-newsroom@mail.nasa.gov.
5:30 p.m. – NASA’s Europa Clipper rollout show. Coverage will stream live on NASA+, the agency’s website, the NASA app, and YouTube.
Thursday, Oct. 10
11:30 a.m. – NASA launch coverage in English begins on NASA+ and the agency’s website.
11:30 a.m. – NASA launch coverage in Spanish begins on NASA+, the agency’s website and NASA’s Spanish YouTube channel.
12:31 p.m. – Launch
Audio Only Coverage
Audio only of the news conferences and launch coverage will be carried on the NASA “V” circuits, which may be accessed by dialing 321-867-1220, -1240 or -7135. On launch day, “mission audio,” countdown activities without NASA+ media launch commentary, is carried on 321-867-7135.
Live Video Coverage Prior to Launch
NASA will provide a live video feed of Launch Complex 39A approximately 18 hours prior to the planned liftoff of the mission on the NASA Kennedy newsroom YouTube channel. The feed will be uninterrupted until the launch broadcast begins on NASA+.
NASA Website Launch Coverage
Launch day coverage of the mission will be available on the agency’s website. Coverage will include links to live streaming and blog updates beginning no earlier than 10 a.m., Oct. 10, as the countdown milestones occur. On-demand streaming video and photos of the launch will be available shortly after liftoff.
Follow countdown coverage on the Europa Clipper blog. For questions about countdown coverage, contact the Kennedy newsroom at 321-867-2468.
Para obtener información sobre cobertura en español en el Centro Espacial Kennedy o si desea solicitar entrevistas en español, comuníquese con Antonia Jaramillo: antonia.jaramillobotero@nasa.gov o Messod Bendayan: messod.c.bendayan@nasa.gov
Attend the Launch Virtually
Members of the public can register to attend this launch virtually. NASA’s virtual guest program for this mission also includes curated launch resources, notifications about related opportunities or changes, and a stamp for the NASA virtual guest passport following launch.
Watch, Engage on Social Media
Let people know you’re following the mission on X, Facebook, and Instagram by using the hashtags #EuropaClipper and #NASASocial. You can also stay connected by following and tagging these accounts:
X: @NASA, @EuropaClipper, @NASASolarSystem, @NASAJPL, @NASAKennedy, @NASA_LSP
Facebook: NASA, NASA’s Europa Clipper, NASA’s JPL, NASA’s Launch Services Program
Instagram: @NASA, @nasasolarsystem, @NASAKennedy, @NASAJPL
For more information about the mission, visit:
https://science.nasa.gov/mission/europa-clipper
-end-
Karen Fox / Molly Wasser
Headquarters, Washington
202-358-1600
karen.c.fox@nasa.gov / molly.l.wasser.nasa.gov
Leejay Lockhart
Kennedy Space Center, Florida
321-747-8310
leejay.lockhart@nasa.gov
Share
Details
Last Updated Oct 03, 2024 LocationKennedy Space Center Related Terms
Europa Clipper Europa Jupiter Jupiter Moons Missions View the full article
-
-
By European Space Agency
Video: 00:00:29 Solar wind is a never-ending stream of charged particles coming from the Sun. Rather than a constant breeze, this wind is rather gusty. As solar wind particles travel through space, they interact with the Sun's variable magnetic field, creating chaotic and fluctuating motion known as turbulence.
This video confirms something long suspected: the turbulent motion of solar wind begins very close to the Sun, inside the solar atmosphere known as the corona. Small disturbances affecting solar wind in the corona are carried outward and expand, generating turbulent flow further out in space.
By blocking out direct light coming from the Sun, the Metis coronagraph instrument on Solar Orbiter is able to capture the fainter visible and ultraviolet light coming from the solar corona. Its high-resolution images show the detailed structure and movement within the corona, revealing how solar wind motion already becomes turbulent at its roots.
The red-tinted ring in the video shows Metis observations made on 12 October 2022. At the time, the spacecraft was just 43.4 million km from the Sun, less than a third of the Sun–Earth distance. The video of the Sun in the centre of the video was recorded by Solar Orbiter’s Extreme Ultraviolet Imager (EUI) on the same day. (Read more about Solar Orbiter’s instruments here.)
“This new analysis provides the first-ever evidence for the onset of fully developed turbulence in the Sun’s corona. Solar Orbiter’s Metis coronagraph was able to detect it very close to the Sun, closer than any spacecraft could approach the Sun and make local measurements,” explains Daniel Müller, ESA’s Solar Orbiter Project Scientist.
Turbulence affects how solar wind is heated, how it moves through the Solar System and how it interacts with the magnetic fields of planets and moons it passes through. Understanding solar wind turbulence is crucial for predicting space weather and its effects on Earth.
‘Metis observation of the onset of fully developed turbulence in the solar corona’ by Daniele Telloni et al. was published today in Astrophysical Journal Letters.
[Video description: The Sun is shown in the centre, surrounded by a ring of data from Solar Orbiter’s Metis coronagraph. The data show changes in brightness of the solar corona, which directly relates to the density of charged particles. These changes are made visible by subtracting consecutive coronal brightness images taken two minutes apart. Red regions show no change, while white and black regions highlight positive and negative changes in brightness. This reveals how charged solar wind particles within the corona move in a chaotic, turbulent way. The video repeats three times.]
View the full article
-
-
Check out these Videos
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.